JIS SUS304 Stainless Steel Split Flange 5K 10K 20K

Split flanges are made up of 2 pieces that can be interlocked securely using nuts and bolts. Split Flange is used to reinforce areas that have been weakened in the piping system. Split flange manufacturers recommend the use of these flanges as flat faced flanges by removing the raised projection on the outside face of the flange.

Material:Stainless Steel SUS304

SUS304 material is a Japanese JIS standard and the most commonly used stainless steel, containing 18% Cr and 8% Ni. It can maintain good strength and heat resistance in high temperature and low temperature environments, and also has good corrosion resistance, weldability, cold workability and mechanical properties in the mild atmosphere.

SUS304 Stainless Steel Chemical Composition

SUS304 Stainless Steel Mechanical Properties

Most Common Face Type of Split Flange

FF-Flat Face

The Flat Face flange has a gasket surface in the same plane as the bolting circle face. Applications using flat face flanges are frequently those in which the mating flange or flanged fitting is made from a casting.

Raised Face height

For the height measures H and B of all described dimensions of flanges on this website, with exception of the Lap Joint flange, it is important to understand and remember the following..

In pressure classes 150 and 300, the height of raised face is approximately 1.6 mm (1/16 inch). In these two pressure classes, almost all suppliers of flanges, show in their catalog or brochure, the H and B dimensions including the raised face height. ((Fig. 1))

In pressure classes 400, 600, 900, 1500 and 2500, the height of raised face is approximately 6.4 mm (1/4 inch). In these pressure classes, most suppliers show the H and B dimensions excluding the raised face height. (Fig. 2)

Ring-Type Joint (RTJ)

The Ring Type Joint flanges are typically used in high pressure (Class 600 and higher rating) and/or high temperature services above 800°F (427°C). They have grooves cut into their faces which steel ring gaskets. The flanges seal when tightened bolts compress the gasket between the flanges into the grooves, deforming (or Coining) the gasket to make intimate contact inside the grooves, creating a metal to metal seal.

An RTJ flange may have a raised face with a ring groove machined into it. This raised face does not serve as any part of the sealing means. For RTJ flanges that seal with ring gaskets, the raised faces of the connected and tightened flanges may contact each other. In this case the compressed gasket will not bear additional load beyond the bolt tension, vibration and movement cannot further crush the gasket and lessen the connecting tension.

Product Information

JIS 5K Split Flange Dimensions (mm)

JIS 10K Split Flange Dimensions (mm)

JIS 20K Split Flange Dimensions (mm)

Kasugai Shanghai, a subsidiary of Kasugai Group headquartered in Osaka, Japan, was established in 2003 as a representative office in Shanghai, China, and was upgraded to a company in 2008. Kasugai Shanghai serves as an important force of Kasugai Group in Asia, and over the past 20 years, it has become a key player in the industrial pipes, fittings, flanges, and valves market.

Kasugai Shanghai leverages the resources and manufacturing capabilities of local suppliers in China to provide a wide range of products, including stainless steel, carbon steel, duplex/super duplex steel, alloy steel, nickel alloy, and titanium alloy, according to various international standards such as ASTM/ASME/ANSI, JIS, EN, and DIN. The company also has a local support team and an on-site quality inspection team to ensure that products meet the specifications and quality requirements of customers.

With the support of high-quality local suppliers and a strong commitment to customer satisfaction, Kasugai Shanghai strives to provide reliable products and services to customers in Asia and beyond. Kasugai Group's establishment of Kasugai Shanghai and other international operations demonstrates their proactive approach to globalization and their commitment to meeting the needs of customers in a rapidly changing global market.

Kasugai Group Company Profile:

Foundation : June, 1925

Legal Representative : Akinori Kasugai

Number of employees : 140 persons (150 persons including employees of the affiliates) As of March 21, 2023

Scope of business : wholesaler and trade firm of industrial pipe/tube, fittings, flanges and valves

Kasugai Group Locations:

Head Office

4-14-2 Shinmachi, Nishi-ku, Osaka 5500013, Japan

TEL: 81-6-6538-7281

FAX: 81-6-6538-2273

E-MAIL: contact@kasugai-group.co.jp

Shanghai

Rm. A8415 Building A8, No. 808 Hongqiao Road, Xuhui District, Shanghai 200030, China.

TEL: 86-21-6447-1967

FAX: 86-21 6447-7841

E-MAIL: zhanghb@kasugai-group-co.jp

Other Branch Offices and Joint Ventures:

Fukuoka, Kitakyushu, Tokai, Kyoto, Shunan, Tokyo, USA (Watchung, N.J.), Jiangyin (Jiangsu, China)

Our Strengths:

Since our foundation in 1925, we have continuously taken steps to further grow our businesses. Global capabilities, professionalism, and trust. These three strengths are the reason that customers continue to choose Kasugai, regardless of the period.

-Global capabilities

We embarked on overseas procurement ahead of our competitors in the industry and have established a supplier network that can meet a variety of market demands. We are successfully chosen by many overseas customers
as a global procurement partner.

- Professionalism

Leveraging expertise cultivated over many years, we deliver optimal products to the optimal place at the optimal time. Our excellent information gathering and problem-solving abilities are also invaluable for solving customer issues.

- Trust

We provide smooth, prompt services by cultivating solid relationships of trust with suppliers. We believe that building stronger partnerships is the source of our growth.